I will outline 3 steps you can take to try to stop the blue screen error occurs. After completing this article, and followed the steps that should be freed of error.

Step 1: Check your registration

The Windows Registry is where all important data is most software programs, Windows help the hardware for  interaction. The file may be corrupt, the big, or lose the information needed to perform important tasks.

If this happens it can cause the blue screen error to occur. The average PC user will probably not have any idea what to do to fix these problems themselves. Fortunately there is software registry repair that will automate the process.

Start by downloading a trial version for free from any utility or mechanical scanning or Reg Cure. Both programs will scan your entire registry and let you know if you have any errors on your machine.

This saves you from spending money before we know for sure if you have a problem or not.

Depending on the test results you may want to pay for the registered edition repair the items found. This is more often then not the cause of blue screen error.

Step 2: Virus Scan and Adware

If you have completed step 1 and not much has changed, then it is time to give this a try. Using your virus removal and adware (if any, if not GriSoft visit to AVG Free and AdAware Free Lavasoft).

These explorations will take a little longer than the registry cleaner scan, but analyzes each corner of your hard drive.

It’s not often that a virus causes a blue screen, but possible. Scanning with these two pieces of software is something you should do once a week or month.

Step 3: Elimination Program and Re-Installation

If steps 1 and 2 have not made any progress with the blue screen error Windows XP is the time for some more drastic measures.

For starters, make sure you have activated Restore Windows and have a set of current restore points. This is outside the scope of this article, but a necessity before proceeding.

Once you’ve done this, take note if the blue screen is happening almost always, while using the same program (s). If it is, and more often, head to your control panel. We will remove and reinstall the application (s) that is causing the blue screen.

Sometimes a corrupted or not a particular program can cause this. If this is the case, then there is no other solution than fixing then file or application. With most of this software requires a full installation, and before reinstalling to avoid causing must remove registry errors.

NOTE: Before doing this, make sure you have the CD, DVD, or downloaded files available to install the program after you remove it.

This process must correct the error once and for all. If it is the last chance is a system reset or a big bill for a repair. None of these is attractive, but if I had to choose one I try to restore the system itself. Just before all that is important to back up before formatting the hard disk and reinstall Windows and all programs.

Most of us encounter this situation at some point, you have a new Personal computer, it performs fine for several months and by that time your computer just isn’t the same as it used to be, you start getting these unfamiliar error messages, dll problems and maybe even system failures. Fortunately, top Recover Windows Xp Registry Tool can effectively repair most of these problems. In the next review you’ll learn exactly how to say goodbye to all these problems.

Let’s first explain what windows-registry is. Well, Registry is a Win inner database which basically stores various data and settings about the different hardware and software installed on your pc. This information is being used by your PC’s Win operating system. After a while that you’ve been using your pc, several software and hardware installations and other files that are being used can corrupt your registry, causing your pc to pop up error messages, reducing your PC’s speed and even affecting your Internet connection speed.

It is vital then to maintain your Pc’s registry configuration organized. It’ll guarantee better performance for a long time. How can this be done? If you know how to handle your registry, then that can be easily done manually, it is no big deal, but when it concerns hundreds of hardware & software configurations on your Computer you may find it almost impossible since it would take much of your time. Most people don’t even know where to start or what to do, so it is important to either let an experienced technician to repair and maintain your registry (Can be very expensive…) or get yourself a professional win-registry repair system.

Very quickly – Recover Windows Xp Registry Tool is a tool which enables you to effectively scan, detect and repair/eliminate problematic configurations from your Windows registry. By doing so it easily enables you to eliminate many unwanted system errors, windows crashes, iexplore errors, Runtime errors and many other irritating Windows problems that most of us probably experience almost daily.

There are countless of Recover Windows Xp Registry Tool solutions on the Web, it is advised to conduct a quick comparison between the web’s top solutions and identify which ones are truly effective on helping you to quickly improve your Win performance.

If you’ve ever had to go to your local office supply store to purchase a black or color ink cartridge for your inkjet printer, have you noticed how the cost of printers has dropped so dramatically? On the other hand the prices of replacement ink cartridges for inkjet printers have remained constant. If you purchase four printer cartridges, you will have spent enough to buy a whole new printer.
People have tried many different things in order to offset the high cost of printer ink. One of the most popular is the use of printer refill kits, and while this is definitely more cost effective, it can be quite messy and time consuming. Another option is using generic and remanufactured cartridges online from reputable suppliers like 00inkjets and Carrot Ink instead of their brand name counter parts, which is going to save you money as well.

What’s in a Name (Branded Printer Ink)?

Either it be canned vegetables, clothing or electronics, today people love brand name products. You are being bombarded with advertisements for any number of things for your mind, body and home. This is the main reason that brand name products cost so much. Companies spend billions of dollars per year on advertisements to make the product memorable for the viewing public.

Most people don’t realize that many generic products are manufactured using the same components, often by subsets of brand name companies and sometimes in the same manufacturing facilities and they are of similar quality.

PrinterInk.com is dedicated to the quality of the products that our customers purchase. This is why we check the quality of the generic and remanufactured cartridges from the companies we review.

Advantages of Generic & Remanufactured Cartridge

Before going for generic or remanufactured printer cartridges, most people worry about the quality of product they will receive.

PrinterInk.com understands that quality is just as important as price. This is why we test the quality of the printer ink cartridges from all of the online companies before we rate them. That is our way of assuring customers that the generic and remanufactured printer ink cartridges they receive will meet their expectations.

There are other advantages for purchasing generic or remanufactured cartridges instead of brand name.

Price – Generic and remanufactured cartridges are substantially cheaper then their brand name counterparts, often half the price.
Selection – By searching PrinterInk.com’s Printer Ink Reviews, you are sure to find a remanufactured or generic cartridge that will be compatible with your inkjet printer.

Service – Companies that make generic or remanufactured cartridges have done extensive research to ensure their product is of the highest quality. All of the online suppliers that PrinterInk.com reviews have generous return policies as well as friendly and knowledgeable customer service departments to handle all of your questions and concerns.

Printer Ink Cartridges

If you think that you are wasting your money purchasing high price brand name printer ink cartridges for your business – switch to generic and remanufactured cartridges today.

Instead of wasting your precious time researching for the best online companies where you can get the highest quality and best value, refer PrinterInk.com. We have done all the work for you! We have reviewed and rated the top six online suppliers of printer ink cartridges and printer refill kits, rating them on product quality, price, selection and service.

Read our Printer ink reviews to check out products from companies such as 4inkjets, 123inkjets and Carrot Ink to help you make the decision on what suits the needs of your business the best. We update our reviews frequently to ensure our customers consistently get the best deal on generic and remanufactured cartridges.
Visit PrinterInk.com whenever it is time to order your ink!

The Rhino Tuff HD7700 is one of the largest and most durable binding punches available on the market. This punch is specifically designed for high volume users such as binderies, printers, copy shops, in-plant print shops and large organizations.

The HD7700 offers the ability to quickly change punching patterns by simply sliding out one die and sliding in the new one.

This machine is known for its rugged industrial construction and is designed for high volume production environments where productivity is essential. In fact, it offers the largest punching capacity of any modular binding punch.

On top of all of that, the HD7700 offers a number of features that are simply not offered on many other modular binding systems.

Strengths / Features:

One of the big strengths of the HD7700 is the huge punching capacity that it offers. Although Rhin-O-Tuff doesn’t publish exact punching capacities for all of the different hole-patterns, they state that it can punch an average of 45 sheets of paper across all punching patterns. Depending on the hole pattern that you are using this number will vary quite a bit. Some hole patterns such as Velobind and 3-hole will be able to handle as many as 55 sheets of paper. However, coil binding which has a large number of holes that are close together will probably only be able to handle 40 sheets. Even so, these punching capacities are impressive.

Most organizations that buy a machine like this are looking for the ability to change punching patterns quickly and easily. The Rhin-O-Tuff HD7700 uses a patented die lock system to hold the dies in place. All you need to do in order to change punching patterns is to release the two die lock levers and slide the die out of the machine. You can then slide the new dieset into the machine and lock it in place. Rhin-O-Tuff makes twelve standard dies and fourteen custom dies for this machine. This means that the HD7700 can produce almost any binding hole pattern that you would ever need.

The punching throat on the Rhino HD-7700 is fourteen inches wide. Additionally, all of the punching dies are fourteen inches on this machine. This makes handling legal sized documents a lot easier. Many other modular binding punches on the market don’t offer legal sized punching dies for many of the hole patterns used in their machines.

The construction of this machine is highly durable. It includes a heavy duty metal case that is highly durable. It also uses high quality steel punching units and internal components that are designed to remain strong in even the highest volume punching environments. Rhin-O-Tuff and its parent company Performance Design Inc. back the construction of this unit up with a one year warranty on the parts for this machine. Similar modular binding punches from GBC only have a 90 day warranty.

In addition to all of these strengths, the HD7700 also comes with a number of other great features including: a manual reverse backup to help clear potential paper jams, an extra large chip tray, an LED diagnostic display and the choice of three different punching activators.

This version of the HD7700 has a vertical punching throat. Some users prefer this style of throat as it allows them to use gravity to help align their pages in the punch. This design also allows users to bolt or set their finishing equipment on the top of the punch. However, users who don’t like a vertical binding punch can always consider the HD7700 Horizontal which offers all the same features as this machine but allows for horizontal punching.

Weaknesses / Limitations:

Much of the hype around the HD7700 surrounds its ability to punch large amounts of paper at a time. However, just because a machine can punch more paper doesn’t mean that you should use it to do that. In my tests with this machine, punching more than twenty to thirty sheets at a time greatly reduced the quality of the punching produced by the machine. Additionally, the pages began to weld together when I punched large stacks of paper. This made it difficult to turn the pages on my bound documents.

There are several comparisons between the features of this machine and the features of the GBC Magnapunch. There is no question, this machine has more features. However, features are only part of the problem. I recently had a customer take both of these machines for a test drive running jobs on each machine with the two systems side by side. The customer ended up choosing the Magnapunch because it was easier to use and helped them to complete their jobs faster. In my tests, I found the same thing.

One of the features that Rhin-O-Tuff brags about in their literature is the design of their die lock system. However, this is one of the things that I like least about this system. I found that even when I locked the die into place on this machine that there was a little bit of play in the punching mechanism. Additionally, the process for removing a punching pin is fairly tedious. This machine uses a steel retainer clip to hold the punching pins in place. This retainer clip needs to be moved out of the way in order to disengage a die. The GBC interchangeable die doesn’t have these problems.

The HD7700 is designed for industrial punching applications. However, it also has a look that is somewhat industrial. This machine fits in fine inside a production area or workshop. However, it can look a little bit out of place in an office environment.

Recommendation:

There is no doubt that the Rhino Tuff HD7700 offers a great set of features. In fact, it has a number of features that other modular binding punches simply do not offer.

It can punch more sheets, offers legal sized punching and has more die set options than any other binding punch on the market.

However, just because a machine has a lot of great features doesn’t mean that it is the best choice on the market.

Some organizations will look at this machine and determine that it is best for their specific application.

Other organizations will look at this machine and choose a machine that is easier to use but offers less features such as the GBC Magnapunch.

These items are rented not only for big corporations but also for individuals. The prices differ greatly from company to company, from location to location. Aside from these, the prices also depend on what kind of rental service you want to avail, will it be in package or anything else. The kinds of item to be rented or product specification is also a factor in item pricing as well as the length of time. What’s great about this business is that they can deliver rental services to different parts of the countries. This is made possible because of the web. The shipping process of the item that is rented by the customers is often shouldered by the audio visual rental service provider.

Since most of the audio visual rental providers are operating online, they are available 24 hours, 7 days every week. This maximizes the providing of services in times of emergency. Some popular brands that they offer for renting include IBM, NEC, Dell, HP Compaq, Apple, Gateway, Toshiba, Sony, and many more. Audio visual rentals are angels because they help you accomplish on the spot works that are given in an unexpected moments. This is what TR Vidcom is all about; the company offers services especially for the needy ones at a very cheap prices. Since the rental industry is growing bigger, the competition becomes very tougher. As a result, the company like TR Vidcom has to offer the service at prices that would allure the potential customers.

Even if the prices are lower compared from other rental companies, this does not mean that the service and the product item are substandard. TR Vidcom only aims in serving the customers best; after all, it’s the customers that matters as a factor in having the business survive.

Visit TR Vidcom site by clicking any of the links in this article for cheap audio visual equipment rental services.

The trick is to create toys and kids’ crafts with your inkjet printer.  Here are a few ideas that you can use.

Jigsaw puzzles. You can download software that can create a jigsaw pattern on any picture.  Use this on some of your child’s favorite pictures and print them on matte paper using your inkjet printer.  Afterwards, you glue this pattern onto a piece of cardboard then cut it up to come up with the jigsaw puzzle pieces.

Coloring sheets. Some parents may think of coloring books as a bit old-fashioned, but they are still a great way of teaching children about colors, shapes and space.  Your own kids will no doubt enjoy them.  But you do not have to buy coloring books; you can just create coloring sheets using your own inkjet printer.  You can download coloring patterns from the Internet, or make your own if you are handy with photo-editing software.  Once you have printed out a bunch, hand them over to your kid along with a box of crayons and your child will be entertained for a whole afternoon.

Pretend food. If you are into baking customized pastries and cakes and if you have an inkjet printer that is dedicated to the creation of edible printouts, you can create pretend food for your kids.  It does not even have to be pretend food at all.  You can cook up your very own toffee or chocolate bar and wrap it up with your special edible inks. You can even use it to make a marshmallow wrap.

Scrapbooking. It is never too early to start scrapbooking, and you can teach your child how to make one using your inkjet printer.  Maybe instead of using actual photos, you can print family photos on your inkjet printer.  And then, you can give these printouts to your kids, along with materials used for scrapbooking that they will not choke on or injure themselves with, such as cardboard, colored paper and ribbons, and let them have a go at their own scrapbooking project.

“Rubber stamps”. Kids love playing with rubber stamps.  You can make your very own unique “rubber stamp” by printing a pattern or a figure that you want on glossy or smooth paper using your inkjet printer.  Once the paper is out of your inkjet printer, you can press the printed surface of this glossy paper on a dry and absorbent paper, and then you would have an imprint.  While this may not be practical for daily play, it could be a wonderful way of adorning notebooks and scrapbooks.

There are many ways that you can entertain your children using an inkjet printer.  You just have to be creative at finding these ways.

Freelance working online can be a very lucrative career encompassing writing articles, designing graphics, video and photo editing, data entry, Internet research, coding and pretty much anything you could imagine as webmasters are in constant need for new and fresh content and generally don’t have the time or the skills to do themselves so they outsource to freelance workers. Since time is money and the more time they have on improving their websites and web presence they also pay very highly for freelance work. These opportunities are everyone online but the problem with getting web freelance work online is the time it takes to find people and companies that require work done and then they prefer you to be highly experienced which makes it somewhat difficult to break into freelance work.

Finding these web freelance jobs can be quite daunting as well. If you enter into a private contract with an employer via their website or a freelance forum you can run the risk of having your work stolen or not being paid and various other bad outcomes. It is for those reasons alone that to succeed in a career in web freelance work you need to find a reputable company that handles all the payment process and middle man work to ensure you do not get a raw deal.

Most settings can be done easily within Windows. However, for some setting you need to dive into the registry or use one of the many registry utilities and some interesting registry tweaks which you can do yourself, using the registry editor.

NOTE: We must be careful editing the registry because worst case scenario will happen such as Windows won’t boot anymore. If you are not sure, leave things unchanged! My advise: create a system image before making major changes!

Windows XP Registry Hacks

Structure of Windows XP Registry:

When you will open the Windows XP Registry , you will see it’s divided into two panes. On the left side there are Five main
Keys as shown below. These can be expanded to several Sub-Keys, which further have many Sub-Keys.
+HKEY_CLASSES_ROOT
+HKEY_CURRENT_USER
+HKEY_LOCAL_MACHINE
+HKEY_USERS
+HKEY_CURRENT_CONFIG
Before you try out the Tweaks, learn how to Backup and Restore Windows XP Registry.

Types of Registry Backups :
It is very important that before you do editing you make a backup of the current registry. If you ignore this warning, it might prove deadly for you.

Open your registry. Go to Start>Run , type regedit . When you invoke the Export function from File>Export, you are given a choice of different file types that can be saved :
Registration Files (*.reg)
Registry Hive Files (*.*)
Text Files (*.txt)
All Files

Each one of the different file types above plays an important role in how the data you export is saved. Choosing the wrong type can give you unexpected results. So let me explain you quickly these file types.

Registrations Files : The Registration Files option creates a .reg file. This is the most well known file format used for backing up the registry. The Registration File can be used in two ways. As a text file it can be read and edited using Notepad outside of Registry Editor. Once the changes have been made and saved, right clicking the file and using the [Merge] command adds the changed file back into the registry. If you make additions to the registry using regedit and then merge the previously saved Registration File, anything that you’ve added via regedit will not be removed, but changes you make to data using regedit that previously existed in the saved Registration File will be overwritten when it is merged

Registry Hive Files : Unlike the Registration Files option above, the Registry Hive Files option creates a binary image of the selected registry key. The image file is not editable via Notepad nor can you view its contents using a text editor. However, what the Registry Hive Files format does is create an image perfect view of the selected key and allow you to import it back into the registry to insure any problematic changes you made are eliminated.

Text Files : This option does just as the name suggests. It creates a text file containing the information in the selected key. It’s most useful purpose is creating a record or snapshot of a key at a particular point in time that you can refer back to if necessary. It cannot be merged back into the registry like a Registration File.

Out of the give above choices , the safest method of backing up registry is to use Registry Hive Files option. No matter what ever you do or goes wrong in editing, importing the image of the key will eliminate all changes.

Windows XP Registry Tips & Tricks

1. Customize Windows Media Player Title Bar
Change the title bar to read Windows Media Player provided by <your text>, so if I had entered text ?Abhishek Bhuyan? , it would read: Windows Media Player provided by Abhishek Bhuyan
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwarePoliciesMicrosoft
Create the Key [WindowsMediaPlayer]
Create String value named [TitleBar]
Data Type: REG_SZ // Value Name: TitleBar
Double click TitleBar and Enter the text to be displayed in the title bar.
Exit Registry / Reboot

2. Minimize Outlook 2002 to the System Tray

If you frequently access Outlook during the day it?s more convenient to have it minimized to the system tray rather than invoking it each time you need to send/receive e-mail. This tweak minimizes Outlook 2002 to the system tray:
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftOffice10.0O utlookPreferences
Modify/Create Data Type DWORD named [MinToTray]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

3. Specify Default IE Download Directory
This tweak changes the default directory where downloads initiated in Internet Explorer are stored on the system.

[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftInternet Explorer
Modify/Create String Value of Data type REG_SZ Named [Download Directory]
Value Data: [Enter Path to Directory to be Assigned as Defualt for Downloads]
Exit Registry / Reboot

4. Force Use of Classic Start Menu
This tweak loads the Classic Start Menu and makes it impossible to change back to the Windows XP version
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionPoliciesExplorer
Modify/Create the DWORD Value of Data type REG_DWORD Named [NoSimpleStartMenu]
Value Data: [0 = Default / 1 = Force Classic Start Menu]
Exit Registry / Reboot

5. Hide/Show Internet Explorer Desktop Icon
By default, Windows XP does not show the Internet Explorer icon on the Windows desktop. Using the registry tweak below allows you to control whether or not the Internet Explorer icon is displayed.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionPoliciesExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoInternetIcon]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

6. Increase Menu Display Speed
When you click on the Start Menu there is some delay to display the contents , just for no reason. Effects are pretty though. The default speed can be adjusted with a quick registry entry.
The default value is 400. Set it to 0 and the delay is gone. If you are not able to adjust pick a number that suits your style and make the change.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERControl PanelDesktop
Modify/Create String value of Data type REG_SZ Named [MenuShowDelay]
Value Data: [Default = 400 / Adjust to Preference]
Exit Registry / Reboot

7. Change the Location of Special Folders
This tweak allows changing the location of special folders on the system. Any of the folders listed in the registry key may be moved.
[Start] [Run] [Regedit]
Go to : HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorerUserShell Folders
Modify/Create String value of Data type REG_SZ Named [Various Folder Names]
Data Type: REG_SZ [String Value] // Value Name: Consult RegEdit for Folder Names
Value Data: [Move the folder to the new desired location using explorer, and then edit the matching folder in RegEdit to reflect the new folder location]
Exit Registry and Reboot

8. Faster Browsing in Windows Explorer on Network Computers
By default, a Windows XP machine connecting to a Windows 95/98/Me computer will search for scheduled tasks or enabled printers on the remote computer. Two sub-keys control this behavior. Deleting them will speed up browsing on the remote computer.
[Start] [Run] [Regedit]
Go to : HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurr entVersionExplorerRemoteComputerNameSpace

To Disable Scheduled Task Checking
Value Name: {D6277990-4C6A-11CF-8D87-00AA0060F5BF}
Delete the sub-key in the left pane of Registry Editor

To Disable Printer Checking
Value Name: {2227A280-3AEA-1069-A2DE-08002B30309D}
Delete the sub-key in the left pane of Registry Editor

Exit Registry / Reboot

9. Add Administrator Account to Log In Screen
When Windows XP is first installed it requires you to enter at least one name of a user who will access the computer. Once you create this name the default Administrator account vanishes. To access it, press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard Windows 2000 logon dialog. Log on as Administrator from this point. To log the Administrator off, click [Start] [Log Off] and [Log Off] when the [Log Off Windows] selection box appears. The Log On screen with the available users will be displayed.

To Make the Administrator Account Always Visible on the Login Screen use this Registry Tweak.
[Start] [Run] [Regedit]
Go to: HKEY_LOCALMACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogonSpecialAccountsUserLis t
Modify/Create DWORD Value of Data type REG_DWORD Named [Administrator]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

10. Increase Internet Download Connections
Increase Simultaneous Internet Download Connections. Increases the number of allowed simultaneous connections to ten (10).
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionInternet Settings
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPer1_0Server]
Setting for Value Data: [0000000a]
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPerServer]
Setting for Value Data: [0000000a]
Exit Registry / Reboot

11. Connected Web Files and Folders
Connecting web files and folders allows a primary .htm or .html file to be moved in conjunction with files associated with the primary document. Once the primary document has been defined, create a sub-folder using the same name as the primary document but assign it a .files extension. Whenever the primary file is moved, the sub-folder will also move and remain as a sub-folder of the primary.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoFileFolderConnection]
Setting for Value Data: [0 = Enabled (Default) / 1 = Disabled]
Exit Registry / Reboot

12. Hide/Show My Documents Folder on Desktop
By default, Windows XP does not show the My Documents folder on the Windows desktop. Using the registry tweak below allows you to control whether or not My Documents is displayed.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorerCLSID{450D8FBA-AD25-11D0-98A8-0800361B1103}ShellFolder
Modify/Create DWORD Value of Data type REG_DWORD Named [Attributes]
Setting for Value Data: [Default = 0xf0400174 / Hidden = 0xf0500174]
Exit Registry / Reboot

13. Create a Hidden User Account
This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it’s necessary to use the Log On To Windows dialog box similar to the one in Windows 2000 i.e. press CTRL+ALT+DEL twice.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCu rrentVersionWinlogonSpecialAccountsUserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Type Name of Account to be Hidden]
Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
Exit Registry / Reboot
While the account is hidden on the Welcome screen, note that the account profile will be visible in C:Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups.

14. Create Legal Notice Logon Dialog Box
In situations where you need users to read a legal notice before logging on, this tweak will create the caption for the notice.
Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeCaption]
Value Data for LegalNoticeCaption: [Type the Caption for the Dialog Box]
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeText]
Value Data for LegalNoticeText: [Type the Data for the Legal Notice]
Exit Registry / Reboot
15. Manage Internet Explorer Error Reporting
This tweak removes the IE Error Reporting tool from appearing with the option to send browser debugging reports to Microsoft.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESoftwareMicrosoftInternet ExplorerMain
Note:- Create both values listed below and set according to the bold type for the tweak to function properly.
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonEnabled]
Value Data: [0 - Disabled / 1 - Enabled]
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonDisabled]
Value Data: [0 - Disabled / 1 - Enabled]
Exit Registry / Reboot

16. Customize Logon and Security Dialog Title
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NT CurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [Welcome]
Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

17. Customize Logon Box Message
This is the message displayed on the Classic Logon box, not the XP ?Welcome? logon screen
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NT CurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [LogonPrompt]
Value Data: [Enter the text of the message]
Exit Registry / Reboot

18. Welcome Screen Logon Vs Classic Logon
This tweak specifies whether the Welcome screen or the Classic logon will be used to access Windows XP.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon
Modify/Create DWORD Value of Data type REG_DWORD Named [LogonType]
Value Data: [0 - Classic Mode / 1 - Welcome Screen]
Exit Registry / Reboot

19. QoS (Quality Of Service) Bandwidth Reserve Setting
By default, Windows XP reserves 20% of the connection bandwidth for QoS traffic. This tweak allows the setting to be altered to a different percentage of connection bandwidth. If the system uses more than a single adapter for network connections, each adapter may be set individually by navigating to:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServic esPschedParametersAdapters{Adpater-ID} rather than HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWin dowsPsched
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWin dowsPsched
Modify/Create DWORD Value of Data type REG_DWORD Named [NonBestEffortLimit]
Setting for Value Data: [Enter as a Percentage / Default Value = 20]
Exit Registry / Reboot

20. Enable/Disable Save Password in DUN
This tweak saves user passwords for Dial Up Networking so they do not have to be re-entered each session.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRasManParameters
Modify/Create DWORD Value of Data type REG_DWORD Named [DisableSavePassword]
Setting for Value Data: [0 = Disabled (Passwords Saved) / 1 = Enabled (Passwords Not Saved)]
Exit Registry / Reboot

21. Change the Registered Organization/Owner of Windows XP
This tweak allows modification of the registered owner and organization of the Windows XP software.
Note:- This tweak has nothing to do with Windows Product Activation (WPA) and will not allow you to register illegal XP software.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersion
Modify/Create String Value of Data type REG_SZ Named [RegisteredOrganization] or [RegisteredOwner]
Setting for Value Data: [Modify the Values to Reflect Current Information]
Exit Registry / Reboot

22. Remove Links Folder in Favorites
The Links folder is part of Favorites whether it’s being accessed through Internet Explorer or the Favorites menu in the Start Menu. This tweak will remove it from those locations.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerToolbar
Modify/Create String Value of Data type REG_SZ Named [LinksFolderName]
Value Data: [Set the String Value to a blank string]
Open Internet Explorer and manually delete the Links folder from Favorites Menu.
The Links folder will not be recreated.
Exit Registry / Reboot

23. Enable/Disable Active Window Tracking to Mouse Movements
When the mouse is moved over an open window it automatically sets the focus to that particular window. It does not bring the window to the foreground of the open windows.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERControl PanelMouse
Modify/Create DWORD Value of Data type REG_DWORD Named [ActiveWindowTracking]
Setting for Value Data: [0 = ActiveWindowTracking Disabled / 1 = ActiveWindowTracking Enabled]
Exit Registry / Reboot

24. Auto Disconnect for Internet Explorer
Use this edit to automatically disconnect from Internet Explorer after a specified length of time has elapsed. Use this trick on anyone whom you don’t like using your computer with net J
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESystemCurrentControlSetServic esLanmanServerParameters
Modify/Create DWORD Value of Data type REG_DWORD Named [Autodisconnect]
Value Data: [Enter a new disconnect time. Use Hexadecimal if you are unfamiliar with Binary]
Exit Registry / Reboot

25. Auto Reboot on System Crash
By default, when the Windows XP operating system crashes an automatic reboot of the system occurs. While this behavior can be convenient, the downside is the error message accompanying the crash is not visible. Often times this information can be a great help in troubleshooting the source of the crash. This behavior can be modified in two ways; via the registry or using the System Properties property sheet.
[Start] [Run] [Regedit]
Registry Key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lCrashControl
Modify/Create DWORD Value of Data type REG_DWORD Named [AutoReboot]
Setting for Value Data: [0 = AutoReboot Disabled / 1 = AutoReboot Enabled]
Exit Registry / Reboot
Open System Properties via Start > Control Panel > Performance and Maintenance > System
[System Properties may also be opened using the WinKey+Pause key combination]
Select the Advanced tab and then click Settings in the Startup and Recovery section
In System Failure section, clear the checkbox next to Automatically Restart
Click OK and OK to exit

26. Modify Control Panel Categories
Even if you like the new style for Control Panel, you might at times wish you could shift some items around into a different category. It’s possible.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurr entVersionControl PanelExtended Properties{305CA226-D286-468e-B848-2B2E8E697B74} 2
Modify/Create DWORD Value of Data type REG_DWORD Named [Choose one of the applets with .cpl extension]
Setting for Value Data: [Select the value from table below]
Other Control Panel Options 0
Appearance and Themes 1
Printers and Other Hardware 2
Network and Internet Connections 3
Sounds, Speed, and Audio Devices 4
Performance and Maintenance 5
Date, Time, Language, and Regional Options 6
Accessibility Options 7
Add or Remove Programs 8
User Accounts 9
Exit Registry / Reboot

To further customize the items that appear in the new Control Panel, do a search of your system for all files that end in .cpl extension. If they aren’t already listed, you can add them with a new DWORD value and then assign them to a category of your choosing.

27. Enable/Disable Run Commands Specific to the Registry
This tweak controls the use of the Run command on the local machine
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersion PoliciesExplorer
Create a DWORD value of Data Type REG_DWORD for each Run function that will be disabled.
Modify/Create the Value Name [DisableLocalMachineRun]
Modify/Create the Value Name [DisableLocalMachineRunOnce]
Modify/Create the Value Name [DisableCurrentUserRun]
Modify/Create the Value Name [DisableCurrentUserRunOnce]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

28. Enable/Disable System Properties Access from My Computer
This tweak removes access to System Properties via My Computer as well as via Control Panel.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoPropertiesMyComputer]
Value Data: [0 - Display Properties / 1 - Hide Properties]
Exit Registry / Reboot

29. Uninstall Programs Manually
Just because Windows XP has the Add/Remove Programs feature it doesn’t mean your application will appear in the list. Furthermore, even if it does appear, it’s no guarantee that the uninstall feature will work. When you run across one of these situations the items listed below will help in getting rid of the application. Be aware that these steps may not remove everything associated with the application and can impact other applications on the computer. Have a backup or restore point and use caution.
Find the directory for the application and delete all the files in the directory. Delete the directory.
Open regedit and navigate to HKEY_LOCAL_MACHINESOFTWARE and find the folder for the application. Delete the folder.
Open regedit and navigate to HKEY_CURRENT_USERSOFTWARE and find the folder for the application. Delete the folder.
To remove the application entry from Add/Remove Programs (if present) open regedit and navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall and find the folder for the application. Delete the folder.
Some applications have Services attached to them. If this is the case, navigate to HKEY_LOCAL_MACHINESystemCurrentControlSetServices, locate and delete the service.
In Windows Explorer, navigate to the individual user settings and delete program references. Common places to check would be:
C:Documents and SettingsAll UsersStart MenuPrograms and delete relevant entries.
C:Documents and SettingsAll UsersStart MenuProgramsStartup and delete relevant entries.
C:Documents and Settings%YourUserID%Start MenuPrograms and delete relevant entries.
[Do this for each User ID listed]

C:Documents and Settings%YourUserID%Start MenuProgramsStartup and delete relevant entries.
[Do this for each User ID listed]
If no entries were found in the previous step and the application launches automatically, navigate to
HKEY_CURRENT_USERSoftwareMicrosoftWindows NTCurrentVersionWindows
and delete the entry.

30. Create a right-click command prompt option
You can right-click a folder to get a list of actions you can apply to it. Hare’s a way to create an action on that right-click menu that opens a command prompt window with that folder as the current directory. In a text editor such as Notepad, type the following exactly:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOTFoldershellCmd Here]
@=?Command &Prompt Here?
[HKEY_CLASSES-ROOTFoldershellCmd Herecommand]
@=?cmd.exe /k pushd %L?
Save the file with any name you want, with a .reg extension. Then double-click the saved file and choose Yes to merge the file’s information into the Registry. You can delete the file. Right-click any folder and you’ll see the Command Prompt Here option.

31. Adjusting System Restore values
The new System Restore feature in Windows XP automatically backs up a snapshot of your system, including your Registry, every 24 hours. It also saves restore points for 90 days. Neither of these values is directly editable in the System Restore program, but you can change them in the Registry. Go to:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCu rrentVersionSystemRestore
You’ll find an assortment of settings here. To change the interval between automatically created restore points, change the RPGlobalInterval setting. To change the number of days that a restore point is retained, change the RPLifeInterval setting.
System Restore time intervals are measured in seconds, not days, so you must convert the number of days you want into seconds. There are 86,400 seconds in a day, so multiply 86,400 by the number of days you want to determine the value. (There are 3,600 seconds in an hour, I hope you know)

32. Erase the swap file at shutdown
You might be concerned about someone browsing your users? swap files and gathering up little bits of their sensitive data. A remote possibility, to be sure, but it could happen. For that extra measure of security, go to:
HKEY_LOCAL_MACHINESystemCurrentControlSetContro lSession ManagerMemory Management
Set the ClearPageFileAtShutdown DWORD to 1. This will make shutdowns take longer, because it overwrites everything in the swap file with zeroes. Don’t turn this feature on unless you have a serious security threat.

33. Delete the Files Stored on This Computer category in the My Computer window
In Windows XP, the My Computer window’s listing is broken down by categories: Hard Disk Drives, Devices with Removable Storage, and so on. One of these categories is Files Stored on This Computer, which appears at the top of the My Computer window. If a user doesn’t need it, you can get rid of it. To do so, go to:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerMyComputerNameSpaceDelegate Folders
Delete the {59031a47-3f72-44a7-89c55595fe6b30ee} sub key to remove the category.

34. Change the desktop cleanup frequency
Through Display Properties (Desktop tab, Customize Desktop button, General tab), you can turn on and off a feature that runs the Desktop Cleanup Wizard every 60 days. You don?t have an option to set a different interval there, but you can change the interval in the Registry. To do so, go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerDesktopCleanupWiz
Change the Days Between Clean Up Value to some other number of days (in decimal format).

35. Sort menus alphabetically
When you install a new program for a user, it doesn?t find its place in the alphabetical Start menu hierarchy right away; it hangs out at the bottom for a little while. If your users employ the Classic Start menu, they can re-alphabetize it manually by right-clicking the taskbar and choosing Properties, clicking the Customize button next to the Classic Start Menu, and clicking the Sort button. With the Windows XP style of Start menu, however, you don?t have an equivalent button. To make Windows always alphabetize the list, remove the permissions from the Registry key that controls the sort order for the Start menu. To do so, go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerMenuOrder
Choose Edit | Permissions and click the Advanced button. Deselect the Inherit From Parent The Permission Entries That Apply To Child Objects check box and then click Copy when the Security dialog box pops up. Click OK and clear the Full Control entry for your account and all security groups you are a member of. Leave only Read permission.

For more information please visit<a onClick=”javascript:pageTracker._trackPageview(‘/outgoing/article_exit_link’);” href=’ http://www.actsolutions.net’> http://www.actsolutions.net</a>

Most settings can be done easily within Windows. However, for some setting you need to dive into the registry or use one of the many registry utilities and some interesting registry tweaks which you can do yourself, using the registry editor.

NOTE: We must be careful editing the registry because worst case scenario will happen such as Windows won’t boot anymore. If you are not sure, leave things unchanged! My advise: create a system image before making major changes!

Windows XP Registry Hacks

Structure of Windows XP Registry:

When you will open the Windows XP Registry , you will see it’s divided into two panes. On the left side there are Five main
Keys as shown below. These can be expanded to several Sub-Keys, which further have many Sub-Keys.
+HKEY_CLASSES_ROOT
+HKEY_CURRENT_USER
+HKEY_LOCAL_MACHINE
+HKEY_USERS
+HKEY_CURRENT_CONFIG
Before you try out the Tweaks, learn how to Backup and Restore Windows XP Registry.

Types of Registry Backups :
It is very important that before you do editing you make a backup of the current registry. If you ignore this warning, it might prove deadly for you.

Open your registry. Go to Start>Run , type regedit . When you invoke the Export function from File>Export, you are given a choice of different file types that can be saved :
Registration Files (*.reg)
Registry Hive Files (*.*)
Text Files (*.txt)
All Files

Each one of the different file types above plays an important role in how the data you export is saved. Choosing the wrong type can give you unexpected results. So let me explain you quickly these file types.

Registrations Files : The Registration Files option creates a .reg file. This is the most well known file format used for backing up the registry. The Registration File can be used in two ways. As a text file it can be read and edited using Notepad outside of Registry Editor. Once the changes have been made and saved, right clicking the file and using the [Merge] command adds the changed file back into the registry. If you make additions to the registry using regedit and then merge the previously saved Registration File, anything that you’ve added via regedit will not be removed, but changes you make to data using regedit that previously existed in the saved Registration File will be overwritten when it is merged

Registry Hive Files : Unlike the Registration Files option above, the Registry Hive Files option creates a binary image of the selected registry key. The image file is not editable via Notepad nor can you view its contents using a text editor. However, what the Registry Hive Files format does is create an image perfect view of the selected key and allow you to import it back into the registry to insure any problematic changes you made are eliminated.

Text Files : This option does just as the name suggests. It creates a text file containing the information in the selected key. It’s most useful purpose is creating a record or snapshot of a key at a particular point in time that you can refer back to if necessary. It cannot be merged back into the registry like a Registration File.

Out of the give above choices , the safest method of backing up registry is to use Registry Hive Files option. No matter what ever you do or goes wrong in editing, importing the image of the key will eliminate all changes.

Windows XP Registry Tips & Tricks

1. Customize Windows Media Player Title Bar
Change the title bar to read Windows Media Player provided by <your text>, so if I had entered text ?Abhishek Bhuyan? , it would read: Windows Media Player provided by Abhishek Bhuyan
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwarePoliciesMicrosoft
Create the Key [WindowsMediaPlayer]
Create String value named [TitleBar]
Data Type: REG_SZ // Value Name: TitleBar
Double click TitleBar and Enter the text to be displayed in the title bar.
Exit Registry / Reboot

2. Minimize Outlook 2002 to the System Tray

If you frequently access Outlook during the day it?s more convenient to have it minimized to the system tray rather than invoking it each time you need to send/receive e-mail. This tweak minimizes Outlook 2002 to the system tray:
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftOffice10.0O utlookPreferences
Modify/Create Data Type DWORD named [MinToTray]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

3. Specify Default IE Download Directory
This tweak changes the default directory where downloads initiated in Internet Explorer are stored on the system.

[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftInternet Explorer
Modify/Create String Value of Data type REG_SZ Named [Download Directory]
Value Data: [Enter Path to Directory to be Assigned as Defualt for Downloads]
Exit Registry / Reboot

4. Force Use of Classic Start Menu
This tweak loads the Classic Start Menu and makes it impossible to change back to the Windows XP version
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionPoliciesExplorer
Modify/Create the DWORD Value of Data type REG_DWORD Named [NoSimpleStartMenu]
Value Data: [0 = Default / 1 = Force Classic Start Menu]
Exit Registry / Reboot

5. Hide/Show Internet Explorer Desktop Icon
By default, Windows XP does not show the Internet Explorer icon on the Windows desktop. Using the registry tweak below allows you to control whether or not the Internet Explorer icon is displayed.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionPoliciesExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoInternetIcon]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

6. Increase Menu Display Speed
When you click on the Start Menu there is some delay to display the contents , just for no reason. Effects are pretty though. The default speed can be adjusted with a quick registry entry.
The default value is 400. Set it to 0 and the delay is gone. If you are not able to adjust pick a number that suits your style and make the change.
[Start] [Run] [Regedit]
Go to HKEY_CURRENT_USERControl PanelDesktop
Modify/Create String value of Data type REG_SZ Named [MenuShowDelay]
Value Data: [Default = 400 / Adjust to Preference]
Exit Registry / Reboot

7. Change the Location of Special Folders
This tweak allows changing the location of special folders on the system. Any of the folders listed in the registry key may be moved.
[Start] [Run] [Regedit]
Go to : HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorerUserShell Folders
Modify/Create String value of Data type REG_SZ Named [Various Folder Names]
Data Type: REG_SZ [String Value] // Value Name: Consult RegEdit for Folder Names
Value Data: [Move the folder to the new desired location using explorer, and then edit the matching folder in RegEdit to reflect the new folder location]
Exit Registry and Reboot

8. Faster Browsing in Windows Explorer on Network Computers
By default, a Windows XP machine connecting to a Windows 95/98/Me computer will search for scheduled tasks or enabled printers on the remote computer. Two sub-keys control this behavior. Deleting them will speed up browsing on the remote computer.
[Start] [Run] [Regedit]
Go to : HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurr entVersionExplorerRemoteComputerNameSpace

To Disable Scheduled Task Checking
Value Name: {D6277990-4C6A-11CF-8D87-00AA0060F5BF}
Delete the sub-key in the left pane of Registry Editor

To Disable Printer Checking
Value Name: {2227A280-3AEA-1069-A2DE-08002B30309D}
Delete the sub-key in the left pane of Registry Editor

Exit Registry / Reboot

9. Add Administrator Account to Log In Screen
When Windows XP is first installed it requires you to enter at least one name of a user who will access the computer. Once you create this name the default Administrator account vanishes. To access it, press Ctrl-Alt-Delete twice at the Welcome screen to retrieve the standard Windows 2000 logon dialog. Log on as Administrator from this point. To log the Administrator off, click [Start] [Log Off] and [Log Off] when the [Log Off Windows] selection box appears. The Log On screen with the available users will be displayed.

To Make the Administrator Account Always Visible on the Login Screen use this Registry Tweak.
[Start] [Run] [Regedit]
Go to: HKEY_LOCALMACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogonSpecialAccountsUserLis t
Modify/Create DWORD Value of Data type REG_DWORD Named [Administrator]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

10. Increase Internet Download Connections
Increase Simultaneous Internet Download Connections. Increases the number of allowed simultaneous connections to ten (10).
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionInternet Settings
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPer1_0Server]
Setting for Value Data: [0000000a]
Modify/Create DWORD Value of Data type REG_DWORD Named [MaxConnectionsPerServer]
Setting for Value Data: [0000000a]
Exit Registry / Reboot

11. Connected Web Files and Folders
Connecting web files and folders allows a primary .htm or .html file to be moved in conjunction with files associated with the primary document. Once the primary document has been defined, create a sub-folder using the same name as the primary document but assign it a .files extension. Whenever the primary file is moved, the sub-folder will also move and remain as a sub-folder of the primary.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoFileFolderConnection]
Setting for Value Data: [0 = Enabled (Default) / 1 = Disabled]
Exit Registry / Reboot

12. Hide/Show My Documents Folder on Desktop
By default, Windows XP does not show the My Documents folder on the Windows desktop. Using the registry tweak below allows you to control whether or not My Documents is displayed.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurre ntVersionExplorerCLSID{450D8FBA-AD25-11D0-98A8-0800361B1103}ShellFolder
Modify/Create DWORD Value of Data type REG_DWORD Named [Attributes]
Setting for Value Data: [Default = 0xf0400174 / Hidden = 0xf0500174]
Exit Registry / Reboot

13. Create a Hidden User Account
This tweak allows an account that is normally displayed on the Welcome screen to be hidden from view. To log on using the account it’s necessary to use the Log On To Windows dialog box similar to the one in Windows 2000 i.e. press CTRL+ALT+DEL twice.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCu rrentVersionWinlogonSpecialAccountsUserList
Modify/Create DWORD Value of Data type REG_DWORD Named [Type Name of Account to be Hidden]
Setting for Value Data: [0 = Account is Hidden / 1 = Enabled]
Exit Registry / Reboot
While the account is hidden on the Welcome screen, note that the account profile will be visible in C:Documents and Settings or wherever user profiles are stored as well as in Local Users and Groups.

14. Create Legal Notice Logon Dialog Box
In situations where you need users to read a legal notice before logging on, this tweak will create the caption for the notice.
Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeCaption]
Value Data for LegalNoticeCaption: [Type the Caption for the Dialog Box]
Modify/Create String Value of Data type REG_SZ Named [LegalNoticeText]
Value Data for LegalNoticeText: [Type the Data for the Legal Notice]
Exit Registry / Reboot
15. Manage Internet Explorer Error Reporting
This tweak removes the IE Error Reporting tool from appearing with the option to send browser debugging reports to Microsoft.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESoftwareMicrosoftInternet ExplorerMain
Note:- Create both values listed below and set according to the bold type for the tweak to function properly.
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonEnabled]
Value Data: [0 - Disabled / 1 - Enabled]
Modify/Create DWORD Value of Data type REG_DWORD Named [IEWatsonDisabled]
Value Data: [0 - Disabled / 1 - Enabled]
Exit Registry / Reboot

16. Customize Logon and Security Dialog Title
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NT CurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [Welcome]
Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

17. Customize Logon Box Message
This is the message displayed on the Classic Logon box, not the XP ?Welcome? logon screen
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NT CurrentVersionWinlogon
Modify/Create String Value of Data type REG_SZ Named [LogonPrompt]
Value Data: [Enter the text of the message]
Exit Registry / Reboot

18. Welcome Screen Logon Vs Classic Logon
This tweak specifies whether the Welcome screen or the Classic logon will be used to access Windows XP.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionWinlogon
Modify/Create DWORD Value of Data type REG_DWORD Named [LogonType]
Value Data: [0 - Classic Mode / 1 - Welcome Screen]
Exit Registry / Reboot

19. QoS (Quality Of Service) Bandwidth Reserve Setting
By default, Windows XP reserves 20% of the connection bandwidth for QoS traffic. This tweak allows the setting to be altered to a different percentage of connection bandwidth. If the system uses more than a single adapter for network connections, each adapter may be set individually by navigating to:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServic esPschedParametersAdapters{Adpater-ID} rather than HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWin dowsPsched
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWin dowsPsched
Modify/Create DWORD Value of Data type REG_DWORD Named [NonBestEffortLimit]
Setting for Value Data: [Enter as a Percentage / Default Value = 20]
Exit Registry / Reboot

20. Enable/Disable Save Password in DUN
This tweak saves user passwords for Dial Up Networking so they do not have to be re-entered each session.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesRasManParameters
Modify/Create DWORD Value of Data type REG_DWORD Named [DisableSavePassword]
Setting for Value Data: [0 = Disabled (Passwords Saved) / 1 = Enabled (Passwords Not Saved)]
Exit Registry / Reboot

21. Change the Registered Organization/Owner of Windows XP
This tweak allows modification of the registered owner and organization of the Windows XP software.
Note:- This tweak has nothing to do with Windows Product Activation (WPA) and will not allow you to register illegal XP software.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersion
Modify/Create String Value of Data type REG_SZ Named [RegisteredOrganization] or [RegisteredOwner]
Setting for Value Data: [Modify the Values to Reflect Current Information]
Exit Registry / Reboot

22. Remove Links Folder in Favorites
The Links folder is part of Favorites whether it’s being accessed through Internet Explorer or the Favorites menu in the Start Menu. This tweak will remove it from those locations.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftInternet ExplorerToolbar
Modify/Create String Value of Data type REG_SZ Named [LinksFolderName]
Value Data: [Set the String Value to a blank string]
Open Internet Explorer and manually delete the Links folder from Favorites Menu.
The Links folder will not be recreated.
Exit Registry / Reboot

23. Enable/Disable Active Window Tracking to Mouse Movements
When the mouse is moved over an open window it automatically sets the focus to that particular window. It does not bring the window to the foreground of the open windows.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERControl PanelMouse
Modify/Create DWORD Value of Data type REG_DWORD Named [ActiveWindowTracking]
Setting for Value Data: [0 = ActiveWindowTracking Disabled / 1 = ActiveWindowTracking Enabled]
Exit Registry / Reboot

24. Auto Disconnect for Internet Explorer
Use this edit to automatically disconnect from Internet Explorer after a specified length of time has elapsed. Use this trick on anyone whom you don’t like using your computer with net J
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESystemCurrentControlSetServic esLanmanServerParameters
Modify/Create DWORD Value of Data type REG_DWORD Named [Autodisconnect]
Value Data: [Enter a new disconnect time. Use Hexadecimal if you are unfamiliar with Binary]
Exit Registry / Reboot

25. Auto Reboot on System Crash
By default, when the Windows XP operating system crashes an automatic reboot of the system occurs. While this behavior can be convenient, the downside is the error message accompanying the crash is not visible. Often times this information can be a great help in troubleshooting the source of the crash. This behavior can be modified in two ways; via the registry or using the System Properties property sheet.
[Start] [Run] [Regedit]
Registry Key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetContro lCrashControl
Modify/Create DWORD Value of Data type REG_DWORD Named [AutoReboot]
Setting for Value Data: [0 = AutoReboot Disabled / 1 = AutoReboot Enabled]
Exit Registry / Reboot
Open System Properties via Start > Control Panel > Performance and Maintenance > System
[System Properties may also be opened using the WinKey+Pause key combination]
Select the Advanced tab and then click Settings in the Startup and Recovery section
In System Failure section, clear the checkbox next to Automatically Restart
Click OK and OK to exit

26. Modify Control Panel Categories
Even if you like the new style for Control Panel, you might at times wish you could shift some items around into a different category. It’s possible.
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurr entVersionControl PanelExtended Properties{305CA226-D286-468e-B848-2B2E8E697B74} 2
Modify/Create DWORD Value of Data type REG_DWORD Named [Choose one of the applets with .cpl extension]
Setting for Value Data: [Select the value from table below]
Other Control Panel Options 0
Appearance and Themes 1
Printers and Other Hardware 2
Network and Internet Connections 3
Sounds, Speed, and Audio Devices 4
Performance and Maintenance 5
Date, Time, Language, and Regional Options 6
Accessibility Options 7
Add or Remove Programs 8
User Accounts 9
Exit Registry / Reboot

To further customize the items that appear in the new Control Panel, do a search of your system for all files that end in .cpl extension. If they aren’t already listed, you can add them with a new DWORD value and then assign them to a category of your choosing.

27. Enable/Disable Run Commands Specific to the Registry
This tweak controls the use of the Run command on the local machine
[Start] [Run] [Regedit]
Go to: HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersion PoliciesExplorer
Create a DWORD value of Data Type REG_DWORD for each Run function that will be disabled.
Modify/Create the Value Name [DisableLocalMachineRun]
Modify/Create the Value Name [DisableLocalMachineRunOnce]
Modify/Create the Value Name [DisableCurrentUserRun]
Modify/Create the Value Name [DisableCurrentUserRunOnce]
Setting for Value Data: [0 = Disabled / 1 = Enabled]
Exit Registry / Reboot

28. Enable/Disable System Properties Access from My Computer
This tweak removes access to System Properties via My Computer as well as via Control Panel.
[Start] [Run] [Regedit]
Go to: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer
Modify/Create DWORD Value of Data type REG_DWORD Named [NoPropertiesMyComputer]
Value Data: [0 - Display Properties / 1 - Hide Properties]
Exit Registry / Reboot

29. Uninstall Programs Manually
Just because Windows XP has the Add/Remove Programs feature it doesn’t mean your application will appear in the list. Furthermore, even if it does appear, it’s no guarantee that the uninstall feature will work. When you run across one of these situations the items listed below will help in getting rid of the application. Be aware that these steps may not remove everything associated with the application and can impact other applications on the computer. Have a backup or restore point and use caution.
Find the directory for the application and delete all the files in the directory. Delete the directory.
Open regedit and navigate to HKEY_LOCAL_MACHINESOFTWARE and find the folder for the application. Delete the folder.
Open regedit and navigate to HKEY_CURRENT_USERSOFTWARE and find the folder for the application. Delete the folder.
To remove the application entry from Add/Remove Programs (if present) open regedit and navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall and find the folder for the application. Delete the folder.
Some applications have Services attached to them. If this is the case, navigate to HKEY_LOCAL_MACHINESystemCurrentControlSetServices, locate and delete the service.
In Windows Explorer, navigate to the individual user settings and delete program references. Common places to check would be:
C:Documents and SettingsAll UsersStart MenuPrograms and delete relevant entries.
C:Documents and SettingsAll UsersStart MenuProgramsStartup and delete relevant entries.
C:Documents and Settings%YourUserID%Start MenuPrograms and delete relevant entries.
[Do this for each User ID listed]

C:Documents and Settings%YourUserID%Start MenuProgramsStartup and delete relevant entries.
[Do this for each User ID listed]
If no entries were found in the previous step and the application launches automatically, navigate to
HKEY_CURRENT_USERSoftwareMicrosoftWindows NTCurrentVersionWindows
and delete the entry.

30. Create a right-click command prompt option
You can right-click a folder to get a list of actions you can apply to it. Hare’s a way to create an action on that right-click menu that opens a command prompt window with that folder as the current directory. In a text editor such as Notepad, type the following exactly:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOTFoldershellCmd Here]
@=?Command &Prompt Here?
[HKEY_CLASSES-ROOTFoldershellCmd Herecommand]
@=?cmd.exe /k pushd %L?
Save the file with any name you want, with a .reg extension. Then double-click the saved file and choose Yes to merge the file’s information into the Registry. You can delete the file. Right-click any folder and you’ll see the Command Prompt Here option.

31. Adjusting System Restore values
The new System Restore feature in Windows XP automatically backs up a snapshot of your system, including your Registry, every 24 hours. It also saves restore points for 90 days. Neither of these values is directly editable in the System Restore program, but you can change them in the Registry. Go to:
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsNTCu rrentVersionSystemRestore
You’ll find an assortment of settings here. To change the interval between automatically created restore points, change the RPGlobalInterval setting. To change the number of days that a restore point is retained, change the RPLifeInterval setting.
System Restore time intervals are measured in seconds, not days, so you must convert the number of days you want into seconds. There are 86,400 seconds in a day, so multiply 86,400 by the number of days you want to determine the value. (There are 3,600 seconds in an hour, I hope you know)

32. Erase the swap file at shutdown
You might be concerned about someone browsing your users? swap files and gathering up little bits of their sensitive data. A remote possibility, to be sure, but it could happen. For that extra measure of security, go to:
HKEY_LOCAL_MACHINESystemCurrentControlSetContro lSession ManagerMemory Management
Set the ClearPageFileAtShutdown DWORD to 1. This will make shutdowns take longer, because it overwrites everything in the swap file with zeroes. Don’t turn this feature on unless you have a serious security threat.

33. Delete the Files Stored on This Computer category in the My Computer window
In Windows XP, the My Computer window’s listing is broken down by categories: Hard Disk Drives, Devices with Removable Storage, and so on. One of these categories is Files Stored on This Computer, which appears at the top of the My Computer window. If a user doesn’t need it, you can get rid of it. To do so, go to:
HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionExplorerMyComputerNameSpaceDelegate Folders
Delete the {59031a47-3f72-44a7-89c55595fe6b30ee} sub key to remove the category.

34. Change the desktop cleanup frequency
Through Display Properties (Desktop tab, Customize Desktop button, General tab), you can turn on and off a feature that runs the Desktop Cleanup Wizard every 60 days. You don?t have an option to set a different interval there, but you can change the interval in the Registry. To do so, go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerDesktopCleanupWiz
Change the Days Between Clean Up Value to some other number of days (in decimal format).

35. Sort menus alphabetically
When you install a new program for a user, it doesn?t find its place in the alphabetical Start menu hierarchy right away; it hangs out at the bottom for a little while. If your users employ the Classic Start menu, they can re-alphabetize it manually by right-clicking the taskbar and choosing Properties, clicking the Customize button next to the Classic Start Menu, and clicking the Sort button. With the Windows XP style of Start menu, however, you don?t have an equivalent button. To make Windows always alphabetize the list, remove the permissions from the Registry key that controls the sort order for the Start menu. To do so, go to:
HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerMenuOrder
Choose Edit | Permissions and click the Advanced button. Deselect the Inherit From Parent The Permission Entries That Apply To Child Objects check box and then click Copy when the Security dialog box pops up. Click OK and clear the Full Control entry for your account and all security groups you are a member of. Leave only Read permission.

For more information please visit<a onClick=”javascript:pageTracker._trackPageview(‘/outgoing/article_exit_link’);” href=’ http://www.actsolutions.net’> http://www.actsolutions.net</a>

If you don’t know what to do to fix a runtime error then you are going to find the easiest way to do so so you can stop worrying and get back to work! Experience has shown me how frustrating these errors are, and how hopeless it sometimes seems to visit site after site searching for help with the issue. You owe it to yourself to keep reading – we’ll get to the root of the problem and a quick and easy solution to ensure an error-free future.

Click here to fix a runtime error now!

To be sure, windows (and pcs in general) are complicated and quite a common thing about complicated systems is that many things can go wrong. One of the most vulnerable areas in your windows system is the registry, in the majority of instances it’s the cause of most errors you are likely to encounter. Maintaining the pc’s registry safe and functioning properly purges your computer of ongoing errors and in fact inhibits problems down the line.

So you see, in case you need to fix a runtime error the first step is to do a scan of your windows registry file, and then repair it. Tampering with a bad registry takes the help of a pro, but this is beyond the means of many people. An effortless and reliable way to go to solve this problem is to download and use an easy-to-use repair program. These registry repair programs were created by software experts to thoroughly examine and then fix a malfunctioning registry system without wasting your valuable time.

When the time comes for you to fix a runtime error It is advised to download a quality repair tool – your registry will thank you! Most registry fix software solutions offer no-charge scans of your pc, so go ahead and give it a try. Be sure to take a moment to verify that the utility you end up using will permit regular scans and updates; if that’s not the case, choose another one. The bulk of these repair tools are very user-friendly and easy to understand; with just a few clicks of your mouse you can do away with your error problems. The most outstanding benefit of registry software is that they enable you to repair a variety of pc troubles all by yourself – you can skip that expensive repair bill! I believe that if you follow these simple guidelines these errors and other troubles will be gone in almost no time at all – actually just minutes!